Tarm 3 OUTDOOR is a 3000 mW RGB white light laser with full analog color modulation and pure diode light source specially designed for outdoor installations.
Unlike the standard tarm 3, it features a waterproof enclosure that not only protects the components inside from water, but also protects against direct heat from sun exposure. A specially designed roof in front of the output window prevents it from being hit by direct rain. To cope with temperature changes, tarm 3 OUTDOOR is equipped with an active water cooling system, integrated in the housing. An active heating system, on the other hand, helps keep laser systems operational even at low temperatures.
Therefore, this appliance can be used at ambient temperatures between -10 °C and +45 °C. An upgrade of the CT scanner with the LAS Turboscan drivers for tarm 3 OUTDOOR is available for higher quality graphics results.
This laser has a built-in network DAC for Showcontroller and Showeditor, but can also be controlled with any ILDA laser control software such as Pangolin Quickshow, Pangolin Beyond, LSX, Lasergraph DSP, etc. via external ILDA interface (e.g. FB3). It also has a built-in memory with preset patterns, which can be easily triggered via DMX and auto mode.
Tarm 3 OUTDOOR comes with an integrated ShowNET network interface and free laser show software (Showeditor). Showcontroller software is also supported and can be purchased additionally. Two different DMX modes are available:
- DJ mode with the most used features by beginners. Only a few DMX channels are used for quick and easy access to the most important settings directly on the laser system
- Professional mode with full DMX functionality, especially for users with a DMX console. All adjustments can be activated and allow full control of the professional laser show.
The integrated ShowNET works as a DAC and allows for ILDA streaming.
The maximum scan speed is very high, equal to 45 kpps @ 8° ILDA for graphic projection and allows a maximum scan angle of 50°; optionally it is possible to have a scanner CT-6210 with 60 kpps @ 8° ILDA and max. scan angle of 60°. High-precision diode arrays provide excellent beam divergence of less than 0.6 mrad for a small beam diameter.
This laser is able to deliver beautiful colors, with good fading. Its 1000 mW and 637 nm single mode red is very bright. We then have a 900 mW green at 520 nm and a 1700 mW blue at 450 nm.
The tarm 3's housing is built in a very robust and dust-resistant way, so there is no air circulation inside the case: this keeps maintenance to a minimum. The mounting bracket allows the laser system to be hung and vertically mounted.
Tarm 3 OUTDOOR is particularly suitable for outdoor laser applications, for fixed installations, advertising, mapping or any type of graphic projection.
- Guaranteed power at aperture: 3000 mW
- Power red: 1000 mW / 637 nm
- Power green: 900 mW / 520 nm
- Power blue: 1700 mW / 450 nm
- Beam specifications: ca. 4.5 mm / <0.6 mrad
- Scanner: 45 kpps @ 8° ILDA; optional: CT-6210 with LAS Turboscan: 60 kpps @ 8° ILDA, max. 60°
- Max. scan angle: 50°
- Laser Source: diode
- Laser class: 4
- Operation modes: LAN, ArtNet, ILDA streaming, integrated SD card, stand-alone
- Basic patterns: over 120 (layers, tunnels, fences, waves, etc.)
- Accessories: incl. power cable, manual, E-Stop, interlock connector, full version Showeditor software license included
- IP rating: IP65
- Power supply: 85 - 250 VAC 50/60 Hz
- Power consumption: 300 W
- Dimensions: 800 x 370 x 260 mm
- Weight: 22 kg
